Mi këtë:



Ene këtë tjetrin, qe jam pendu se e kam ne Shqipëri

Këtë celular e mora unë sot.  :occ

E mora me lajmerim, paguar çdo muaj nga 15 €, + telefoni ishte 49 €.

 

Tek MediaWord telefinia 3 me C.Card e merr me 1 euro.

Paguhet çdo muaj 9 euro për 12 muaj.

Sa mirë e ka kuptuar MAX Vetëm kur digjesh e kupton  

Edhe unë për vete se marr kurrë më me cerdit card se pastaj te tjerët e msojne hilen ete bëjnë zile s'të merr me njeri ne tel

Celulari im:

Kurse un kam këtë Celular.

[attachment deleted by admin]

Nokia Codes
*3001#12345# Programming Menu
Program NAMs
Fieldtest
Serial Number
P/RSIDs
*#639#
Program Phone Number
*#92772689# Warranty Information
Serial Number
Life Timer
Build Date
Programmed Date (editable once only)
*#9999# - Display Software Version
Displays Current Software Version
Known Versions
v 06.08 , 22/06/00 NSW-4
v 06.09 , 07/07/00 NSW-4
v 06.12 , 25/10/00 NSW-4
Change Alpha Tag on a Nokia
The alpha tag is the message that is displayed on Jur phone when in digital coverage.
This is normally transmitted by the network, but can be overidden to display a different
tag. This is done by creating a tag for a personal/residential zone in the phone, and setting
this zone to have the same settings as Jur normal carrier. So when the phone identifies
the network system it believes it is in the personal/residential zone and displays the tag
Ju have programmed.
1) Enter programming mode of the phone by keying *3001#12345#
2) Find out the ID of Jur operator by entering the NAM1 menu. Note the Home System
ID setting. (16387 on Rogers AT&T in Calgary)
3) Scroll to and enter PSID/RSID lists (menu 7)
4) Select P/RSID 1
5) Scroll to PSID/RSID and change the setting to 1
6) Scroll to Connected system ID and change the setting to the ID of Jur system (eg
16387)
7) Scroll to Alpha Tag and enter the message Ju would like displayed.
8) Scroll to Operator code (SOC) and enter coed for Jur provider such as 2050 for
Rogers or 2049 for AT&T
9) Scroll to Country code and enter 302 for Rogers or 310 for AT&T
10) Power cycle Jur phone and hopefully Jur message will be displayed
+BY+=SUBWOOLF
`
RADAR SPEED TRAPS
Jur Nokia cell phone can be programmed to pick up radar speed traps,
when programmed Jur cell phone picks up the radar and alerts Ju on
the message alert tonë.
1. Enter Jur menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds Jur phone will display a
radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. Cell info display
needs to be de-activated. Settings -> Phone Settings -> Cell Info
display
Each time Ju turn off Jur phone, or even each time Ju loose contact
with Jur carrier, Ju'll have to activate it again... It is done by
steps 1 through 5, but the number (00000) will be already on the field
as default. If Ju put the number 500 in the closed user group, and Ju
go out of a store with detection ports thy will go off.
Firmware version:
*#0000#
*#51x0# or
*#9999#
View Serial No., Date Made, Programming Date, Repaired:
*#92772689#
Thanks to Ben-Dov for this code
IMEI (International Mobile Equipment Identity) Code:
*#06#
Enhanced Full Rate (EFR):
*3370# to activate EFR. Makes calls sound better, but decreases battery
life by about 5%.
#3370# to deactivate EFR
Half Rate Mode (HFR):
*4720# to activate HFR. Decreases call quality but increases battery
life by about 30%.
#4270# to deactivate HFR.
Default Security Code:
12345
Warranty Code:
*#92702689# [*#war0anty#] asks warranty code. Ju can then type a
number of codes (Thanks to Mike Pfaff for these codes):
6232 - Display date of manufacture
7332 - Display date of last repair
7832 - Display purchasing date
9268 - Display serial number
37832 - Set purchasing date to MMYY
87267 - Confirm Transfer, Related to firmware upgrades
#746025625# says SIM CLOCK STOP ALLOWED or similar, depending on Jur
SIM card. Newer SIMs have a feature called 'clock stopping' that allows
the phone to save energy -- it is a kind of sleep mode for SIM cards.
Not all versions of software support this. Ju cannot turn the SIM
clock on and off, the phone will do it automatically if the SIM
supports clock stopping.
Nokia 8210 Secret Codes
Check the IMEI *#06#
Check software version *#0000#
Warranty menu *#92702689#
Press the following warranty code
6232 (OK) Displays the Month and Year of Manufacture
7332 (OK) Displays the date of the last repairment
7832 (OK) Displays the date where the phone was purchased
9268 (OK) Displays Serial Number
37832 (OK) Set the Purchasing Date MMYY
87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone to
another
BY+=SUBWOOLF

Burimi: Forumi Hapesira